Evaluation of surface roughness, wettability and adhesion of multispecies biofilm on 3D-printed resins for the base and teeth of complete dentures.

OBJECTIVE: This study evaluated the surface roughness, wettability and adhesion of multispecies biofilms (Candida albicans, Staphylococcus aureus and Streptococcus mutans) on 3D-printed resins for complete denture bases and teeth compared to conventional resins (heat-polymerized acrylic resin; artificial pre-fabricated teeth). METHODOLOGY: Circular specimens (n=39; 6.0 mm Ø × 2.0 mm) of each group were subjected to roughness (n=30), wettability (n=30) and biofilm adhesion (n=9) tests. Three roughness measurements were taken by laser confocal microscopy and a mean value was calculated. Wettability was evaluated by the contact angle of sessile drop method, considering the mean of the three evaluations per specimen. In parallel, microorganism adhesion to resin surfaces was evaluated using a multispecies biofilm model. Microbial load was evaluated by determining the number of Colony Forming Units (CFU/mL) and by scanning electron microscopy (SEM). Data were subjected to the Wald test in a generalized linear model with multiple comparisons and Bonferroni adjustment, as well as two-way ANOVA (α=5%). RESULTS: The roughness of the conventional base resin (0.01±0.04) was lower than that of the conventional tooth (0.14±0.04) (p=0.023) and 3D-printed base (0.18±0.08) (p<0.001). For wettability, conventional resin (84.20±5.57) showed a higher contact angle than the 3D-printed resin (60.58±6.18) (p<0.001). Higher microbial loads of S. mutans (p=0.023) and S. aureus (p=0.010) were observed on the surface of the conventional resin (S. mutans: 5.48±1.55; S. aureus: 7.01±0.57) compared to the 3D-printed resin (S. mutans: 4.11±1.96; S. aureus: 6.42±0.78). The adhesion of C. albicans was not affected by surface characteristics. The conventional base resin showed less roughness than the conventional dental resin and the printed base resin. CONCLUSION: The 3D-printed resins for base and tooth showed less hydrophobicity and less adhesion of S. mutans and S. aureus than conventional resins.

In vitro comparison of antifungal activity of conventional alcohol sprays and antimicrobial photodynamic therapy on acrylic denture resin.

BACKGROUND: Traditionally, alcohol sprays are used for disinfection of acrylic-base denture surfaces. A limited number of studies have assessed the role of antimicrobial photodynamic therapy (aPDT) in this regard; however, it remains debatable whether conventional alcohol sprays are superior to aPDT in terms of antifungal activity or vis versa. OBJECTIVE: The aim of the present in vitro study is to compare the antifungal activity of conventional alcohol sprays and aPDT on acrylic denture resin. METHODS: Individuals wearing complete dentures at least on one arch were included. Dentures were randomly divided into three groups. Groups 1-3 were disinfected with an alcohol-based antiseptic spray and aPDT, respectively. Assessment of oral yeast growth was done using swab samples. The culture mediums were incubated at 37∘C for 72 hours and viewed through a microscope. The numbers of colony forming units (CFU/ml) were determined. P< 0.05 were considered statistically significant. RESULTS: At baseline, the mean CFU/ml in Groups 1-3 were comparable. After disinfection, a statistically significant reduction in microbial CFU/ml was observed in Groups 1 (P< 0.05) and 2 (P< 0.05) compared with baseline. In Group 3, there was no difference in CFU/ml throughout the study. After disinfection, there was no difference in microbial CFU/ml in dentures in Groups 1 and 2. CONCLUSION: Conventional alcohol sprays are as effective as aPDT towards reducing oral yeasts CFU/ml on acrylic denture resin.

Development of novel antimicrobial acrylic denture modified with copper nanoparticles.

PURPOSE: This study aimed to synthesize heat-cured poly(methyl methacrylate) (PMMA) acrylic formulated with copper nanoparticles (nCu) for producing dentures with antimicrobial properties and ability to prevent denture stomatitis (DS). METHODS: nCu/PMMA nanocomposites were prepared through in situ formation of nCu into methyl methacrylate (MMA). The fabricated material was characterized using scanning electron microscopy, spectroscopy (energy-dispersive X-ray, attenuated total reflectance-Fourier-transform infrared, and X-ray photoelectron spectroscopy), X-ray diffraction analysis, and mechanical flexural tests (ISO 20795-1:2008). Antimicrobial activity against Candida albicans and oral bacteria was determined. MTS assay (ISO 10993-5:2009) and copper release experiments were conducted to assess cytotoxicity. In the clinical trial, participants wearing nCu/PMMA (n=25) and PMMA (n=25) dentures were compared; specifically, DS incidence and severity and Candida species proliferation were assessed for 12 months. Data were analyzed using analysis of variance with Tukey's post hoc test (α=0.05). RESULTS: nCu/PMMA nanocomposite loaded with 0.045% nCu exhibited the maximum antimicrobial activity against C. albicans and other oral bacteria without producing cytotoxicity in the wearer. nCu/PMMA dentures retained their mechanical and aesthetic properties as well as inhibited the growth of Candida species on both denture surface and patient palate. DS incidence and severity were lower in the nCu/PMMA denture group than in the PMMA denture group. CONCLUSIONS: PMMA acrylic produced with copper nanotechnology is antimicrobial, biocompatible, and aesthetic and can reduce DS incidence. Thus, this material may act as a novel preventive alternative for oral infections associated with denture use.

Microbial adhesion and biofilm formation by Candida albicans on 3D-printed denture base resins.

This study evaluated surface properties and adhesion/biofilm formation by Candida albicans on 3D printed denture base resins used in 3D printing. Disc-shaped specimens (15 mm x 3 mm) of two 3D-printed resins (NextDent Denture 3D+, NE, n = 64; and Cosmos Denture, CO, n = 64) and a heat-polymerized resin (Lucitone 550, LU, control, n = 64) were analyzed for surface roughness (Ra µm) and surface free energy (erg cm-2). Microbiologic assays (90-min adhesion and 48-h biofilm formation by C. albicans) were performed five times in triplicate, with the evaluation of the specimens' surface for: (i) colony forming units count (CFU/mL), (ii) cellular metabolism (XTT assay), and (iii) fluorescence and thickness of biofilm layers (confocal laser scanning microscopy). Data were analyzed using parametric and nonparametric tests (α = 0.05). LU presented higher surface roughness Ra (0.329±0.076 µm) than NE (0.295±0.056 µm) (p = 0.024), but both were similar to CO (0.315±0.058 µm) (p = 1.000 and p = 0.129, respectively). LU showed lower surface free energy (47.47±2.01 erg cm-2) than CO (49.61±1.88 erg cm-2) and NE (49.23±2.16 erg cm-2) (p<0.001 for both). The CO and NE resins showed greater cellular metabolism (p<0.001) and CO only, showed greater colonization (p = 0.015) by C. albicans than LU in the 90-min and 48-hour periods. It can be concluded that both 3D-printed denture base resins are more prone to colonization by C. albicans, and that their surface free energy may be more likely associated with that colonization than their surface roughness.

Sargassum polycystum and Turbinaria conoides Seaweed-based Novel Denture Cleanser: An In Vitro Study.

AIM: The study ventures into evaluating the antifungal and antibacterial efficacy of commercially available denture cleanser with Sargassum polycystum, Turbinaria conoides seaweeds, and the combination of seaweeds. MATERIALS AND METHODS: Poly(methyl methacrylate) disks measuring 10 × 2 mm were fabricated. The samples are divided into four groups of 21 samples each. The denture base was coated with Candida albicans and Streptococcus mutans individually. Group I was treated with Fittydent, group II (S. polycystum and T. conoides seaweeds combination), group III (S. polycystum), and group IV (T. conoides). The colony-formation units present on the surface of the denture were evaluated before and after treatment with different denture cleansers using the serial dilution method. Statistical analysis was done using descriptive statistics, analysis of variance, and post hoc Bonferroni analysis. RESULTS: At 10-5 dilution, T. conoides (group IV) was statistically significant in reducing both C. albicans and S. mutans. At 10-10 dilution, T. conoides (group IV) and S. polycystum and T. conoides combination (group II) had high antibacterial efficacy and were statistically significant. Fittydent (group I) had higher antifungal efficacy and was statistically significant in comparison to S. polycystum (group III) alone. At 10-10 dilution, the T. conoides (group IV), S. polycystum, and T. conoides combination (group II) showed no evidence of a significant difference in comparison to Fittydent (group I). Fittydent had higher antibacterial efficacy and was statistically significant in comparison to S. polycystum (group III) alone. CONCLUSION: Sargassum polycystum and T. conoides combination and T. conoides were found to have higher antibacterial efficacy in comparison to commercially available denture cleanser and also were found to have equal antifungal efficacy in comparison to commercially available denture cleanser.

Anti-fungal efficacy of Miswak Extract (Salvadora Persica) and commercial cleaner against Candida albicans on heat cured polymethylmethacrylate denture base.

AIM: The aim of the study was to compare the antifungal efficacy between commercial cleaner (Corega) and Miswak extract (Salvadora persica) against Candida albicans on heat cured Polymethyl methacrylate (PMMA) acrylic denture base resin. MATERIALS AND METHODS: Forty-eight samples of heat cured PMMA acrylic denture base resin were fabircated in the study. The sterile acrylic resin specimens were immersed in standardized cell suspension of Candida albicans and incubated for 60 min at 370°C for cell adhesion and 2 h at 370°C for biofilm formation. After 24 h biofilm was evaluated by cell viability (CFUs) on SDA and cell counting of Candida albicans under light microscope at 400× magnification. The fungicidal effect of commercial cleaner and Miswak extract on Candida albicans biofilm was then evaluated by colony-forming units on SDA and cell counting under light microscope at 400× magnification. RESULTS: Screening test agar disk-diffusion assay showed mean inhibitory zone of 3 mm for commercial cleaner as compared to Miswak extract, which showed mean inhibitory zone of 2 and 1 mm for different concentrations. Broth microdilution method showed 31 mg/ml MIC and 62.5 mg/ml Minimal Fungicidal Concentration (MFC) values for commercial cleaner as compared to Miswak extract that showed 125 mg/ml MIC and 250 mg/ml MFC values against Candida albicans. A significant difference (p < 0.05) was observed between pre and post treatment of both commercial cleaner and Miswak extract, for CFUs and cell count for Candida albicans. CONCLUSION: Commercial denture cleaner (Corega) showed better antifungal (C albicans) activity than Miswak extract (Salvadora persica) on heat cured PMMA acrylic denture base resin.

Comparison of antifungal efficacy of commercially available denture cleanser and the extract of Turbinaria conoides seaweed against Candida albicans adherent to acrylic denture base resin: An in vitro study.

Aim: One of the main factors responsible for the development of Candida albicans on the surface of denture is improper maintenance of dentures. Denture hygiene can be achieved by regular cleansing of dentures using an appropriate denture cleanser. The aim of the study is to evaluate the antifungal efficacy of commercially available denture cleanser and the extract of Turbinaria conoides seaweed against C. albicans adherent to the surface of denture base resin. Settings and Design: This was an in vitro experimental study. Materials and Methods: Twenty-four Acrylic resin samples of dimension 10-mm radius and 2-mm thickness was randomly divided into two groups. The denture base resin was coated with C. albicans. The colonies present on the surface of each denture base resin were evaluated by serial dilution method. Group A was treated with commercially available denture cleanser and Group B was treated with extract of seaweed T. conoides. The colonies were then evaluated using serial dilution. Statistical Analysis Used: The colony count values obtained by serial dilution were tabulated. These values were statistically analysed using t-test. Results: Reduction of colony count is more in T. conoides than commercially available Fittydent; the difference was statistically significant with a mean difference of 65 at dilution 10-2 and 29.25 at dilution 10-3 using t-test with P < 0.001. Conclusion: Within the limitations of this in vitro study, it was proved that the extract of T. conoides seaweed and commercially available denture cleanser Fittydent was effective in reducing the colony count of C. albicans. T. conoides seaweed is statistically significant than commercially available Fittydent.

Silver nanoparticles in denture adhesive: An antimicrobial approach against Candida albicans.

OBJECTIVE: To evaluate the antimicrobial potential of silver nanoparticles (Ag NPs) synthesized using three different routes (ultraviolet light, Turkevich, and green chemistry method using Glycine max extract) associated with COREGA® denture powder adhesive. METHODS: Heat-cured acrylic resin specimens were treated with different Ag NPs associated with the adhesive (AD + Ag UV, AD + Ag Turk, and AD + Ag Gm groups). As controls, the specimens were treated with a combination of adhesive and nystatin (AD + Nyst group), only adhesive (AD group), or submerged on the surface of the specimens (PBS group). After the treatments, biofilms of C. albicans developed for 3, 6, and 12 h on the specimen surfaces. The biofilm was quantified using colony-forming units per milliliter, colorimetric assay, and confocal laser scanning microscopy. RESULTS: Regardless of the period, we observed an inhibition of fungal load and a reduction in metabolic activity and biofilm mass in the resin specimens treated with the combinations AD/Ag NPs, compared to AD and PBS. The antimicrobial action of the AD + Turk and AD + Ag Gm groups was similar than that for the AD + Nyst group in all periods and viability tests, except for the biofilm mass (12 h). CONCLUSIONS: The COREGA® adhesive with Ag NPs, mainly those synthesized using the Turkevich and Glycine max methods, showed excellent antimicrobial activity against C. albicans biofilms, maintained for up to 12 h. CLINICAL SIGNIFICANCE: The association of Ag NPs to the adhesive can add preventive or therapeutic effects against denture stomatitis, to this prosthetic material.

Surface Characteristics and Microbial Adhesion in Polymethylmethacrylate for Denture Base Submitted to Antimicrobial Agents and Cleaning Agents: A Systematic Review.

This review aimed to identify the influence of antimicrobial and cleaning agents on surface characteristics such as surface free energy (SFE) and wettability, and microbial adhesion in polymethylmethacrylate (PMMA) for denture base. The review question, based on PICO, was: "Does intervention with antimicrobial and cleaning agents in PMMA influence the surface free energy, wettability, and consequently the microbial adhesion?" and the protocol was registered in Open Science Framework (osf. io/v3xgn). The search was performed in PubMed, Lilacs, Embase, Scopus, and Science Direct databases, using the terms: ("acrylic resin" OR PMMA) AND (antimicrobial OR antibacterial) AND ("electrostatic interaction" OR surface free energy) AND (biofilm OR "bacteria adhesion"), and resulted in 462 articles, of which 7 were included. The antimicrobials polypara-xylylene, carboxybetaine methacrylate, ethylene glycol methacrylate phosphate, and deposition of F and Ag ions in PMMA influenced the SFE and wettability. Denture cleaners reduced microbial adhesion. Five of the included studies evaluated the microbial adhesion, however, only two observed a direct relationship between SFE, wettability, and microbial adhesion. It was concluded that the intervention with antimicrobial and cleaning agents in PMMA can interfere in SFE and surface wettability, but no correlation was observed between microbial adhesion and these surface characteristics in PMMA.

Antimicrobial surface processing of polymethyl methacrylate denture base resin using a novel silica-based coating technology.

OBJECTIVES: This study investigated the surface characteristics of denture base resin coatings prepared using a novel silica-based film containing hinokitiol and assessed the effect of this coating on Candida albicans adhesion and growth. METHODS: Silica-based coating solutions (control solution; CS) and CS containing hinokitiol (CS-H) were prepared. C. albicans biofilm formed on denture base specimens coated with each solution and these uncoated specimens (control) were analyzed using colony-forming unit (CFU) assay, fluorescence microscopy, and scanning electron microscopy (SEM). Specimen surfaces were analyzed by measuring the surface roughness and wettability and with Fourier-transform infrared (FT-IR) and proton nuclear magnetic resonance (1H NMR). Stability of coated specimens was assessed via immersion in water for 1 week for each group (control-1w, CS-1w, and CS-H-1w) followed by CFU assay, measurement of surface roughness and wettability, and FT-IR. RESULTS: CS-H and CS-H-1w contained significantly lower CFUs than those present in the control and control-1w, which was also confirmed via SEM. Fluorescence microscopy from the CS-H group identified several dead cells. The values of surface roughness from coating groups were significantly less than those from the control and control-1w. The surface wettability from all coating groups exhibited high hydrophobicity. FT-IR analyses demonstrated that specimens were successfully coated, and 1H NMR analyses showed that hinokitiol was incorporated inside CS-H. CONCLUSIONS: A silica-based denture coating that incorporates hinokitiol inhibits C. albicans growth on denture. CLINICAL RELEVANCE: We provide a novel antifungal denture coating which can be helpful for the treatment of denture stomatitis.

Antifungal effect, surface roughness, and cytotoxicity of three-dimensionally printed denture base with phytoncide-filled microcapsules: An in-vitro study.

OBJECTIVES: To produce three-dimensionally (3D) printed removable denture bases with antifungal activity using microencapsulation of phytochemicals that inhibit Candida albicans growth. METHODS: Two types of phytoncide oil extract A and B were micro-encapsulated. The phytoncide-filled microcapsules were mixed with denture base resin for 3D printing with various concentration conditions, and manufactured into the discs by digital light processing. The microcapsule concentrations in 3D-printed discs were 2, 4, 6 and 8wt% for the phytoncide oil A, and 5, 10, 15, 20, and 25wt% for the phytoncide oil B. Nine groups with different microcapsule concentrations and a control group were prepared (n = 5). Microcapsule-containing 3D-printed denture base resin discs were evaluated in terms of surface roughness, polymerization, antifungal activity, and its persistence against C. albicans, and cytotoxicity. RESULTS: There was no significant difference amongst the surface roughness values of all discs. The polymerization of 3D-printed resin disc with microcapsule was different between phytoncide type A and B. The discs with phytoncide-filled microcapsules at 6wt% for type A and 15wt% for type B showed significant antifungal activities against C. albicans at 4 weeks. All discs were reported to be non-cytotoxic to human gingival fibroblasts. CONCLUSIONS: Denture base resin discs with antifungal activities were successfully manufactured using phytoncide micro-encapsulation and digital light processing. Considering the antifungal effect and its persistence, surface roughness, polymerization, and cytotoxicity, the optimal microcapsule concentrations for 3D-printed denture bases were 6wt% and 15wt% for phytoncide A and B, respectively. CLINICAL SIGNIFICANCE: Using micro-encapsulation of phytochemicals such as phytoncide oil, denture base resin materials with antifungal activities can be successfully fabricated by digital light processing.

Molecular weight tuning optimizes poly(2-methoxyethyl acrylate) dispersion to enhance the aging resistance and anti-fouling behavior of denture base resin.

Poly(methyl methacrylate) (PMMA)-based denture base resins easily develop oral bacterial and fungal biofilms, which may constitute a significant health risk. Conventional bacterial-resistant additives and coatings often cause undesirable changes in the resin. Reduced bacterial resistance over time in the harsh oral environment is a major challenge in resin development. Poly(2-methoxyethyl acrylate) (PMEA) has anti-fouling properties; however, due to the oily/rubbery state of this polymer, and its surface aggregation tendency in a resin mixture, its direct use as a resin additive is limited. This study aimed to optimize the use of PMEA in dental resins. Acrylic resins containing a series of PMEA polymers with various molecular weights (MWs) at different concentrations were prepared, and the mechanical properties, surface gloss, direct transmittance, and cytotoxicity were evaluated, along with the distribution of PMEA in the resin. Resins with low-MW PMEA (2000 g mol-1) (PMEA-1) at low concentrations satisfied the clinical requirements for denture resins, and the PMEA was homogeneously distributed. The anti-fouling performance of the resin was evaluated for protein adsorption, bacterial and fungal attachment, and saliva-derived biofilm formation. The PMEA-1 resin most effectively inhibited biofilm formation (∼50% reduction in biofilm mass and thickness compared to those of the control). Post-aged resins maintained their mechanical properties and anti-fouling activity, and polished surfaces had the same anti-biofilm behavior. Based on wettability and tribological results, we propose that the PMEA additive creates a non-stick surface to inhibit biofilm formation. This study demonstrated that PMEA additives can provide a stable and biocompatible anti-fouling surface, without sacrificing the mechanical properties and aesthetics of denture resins.

Novel cinnamon-laden nanofibers as a potential antifungal coating for poly(methyl methacrylate) denture base materials.

OBJECTIVES: To modify the surface of denture base material by coating it with cinnamon-laden nanofibers to reduce Candida albicans (C. albicans) adhesion and/or proliferation. MATERIALS AND METHODS: Heat-cured poly(methyl methacrylate) (PMMA) specimens were processed and coated, or not, with cinnamon-laden polymeric nanofibers (20 or 40 wt.% of cinnamon relative to the total polymer weight). Scanning electron microscopy (SEM) and Fourier-transform infrared spectroscopy (FTIR) analyses of the nanofibers were performed. Antifungal activity was assessed through agar diffusion and colony-forming unit (CFU/mL) assays. Representative SEM morphological analysis was carried out to observe the presence/absence of C. albicans on the fibers. Alamar blue assay was used to determine cell toxicity. Analysis of variance and the Tukey's test were used to analyze the data (α = 0.05). RESULTS: SEM imaging revealed nanofibers with adequate (i.e., bead-free) morphological characteristics and uniform microstructure. FTIR confirmed cinnamon incorporation. The cinnamon-laden nanofibers led to growth inhibition of C. albicans. Viable fungal counts support a significant reduction on CFU/mL also directly related to cinnamon concentration (40 wt.%: mean log 6.17 CFU/mL < 20 wt.%: mean log 7.12 CFU/mL), which agrees with the SEM images. Cinnamon-laden nanofibers at 40 wt.% led to increased cell death. CONCLUSIONS: The deposition of 20 wt.% cinnamon-laden nanofibers onto PMMA surfaces led to a significant reduction of the adhesive and/or proliferative ability of C. albicans, while maintaining epithelial cells' viability. CLINICAL RELEVANCE: The high recurrence rates of denture stomatitis are associated with patient non-adherence to treatments and contaminated prostheses use. Here, we provide the non-patients' cooperation sensible method, which possesses antifungal action, hence improving treatment effectiveness.

BACTERIAL CONTAMINATION AND METHODS OF DECONTAMINATION OF BASES COMPLETE REMOVABLE PROSTHESES DURING THE APPLICATION OF ADHESIVE MATERIALS.

It turned out that the permanent microbiota of surfaces of acrylic bases of complete removable plastic dentures (CRPD) characterized by several features: the presence of aerobic (7) and anaerobic (10) species. Qualitative and quantitative compositions of microbiocenosis in orthopedic treatment stages have been changed. The revealed patterns require further study in the context of the improvement of decolonization of acrylic bases in the stages of orthopedic treatment by CRPD. Deactivation of acrylic bases of CRPD significantly affects the species composition of microbiota, reduces the quantitative parameters of bacterial contamination. The purpose of our work was determination of bacterial contamination of acrylic bases of CRPD in stages of their clinical exploitation and study of changes in the quantitative composition of the acrylic bases microbiota of CRPD under different decontamination modes. Smears from the inner surface of the acrylic base were stained with Gram and microscopic and seeded on blood agar, Endo agar, Chistovich, Saburo. Species belonging to the micro-organisms were identified by the LAHEMA test system and were determined in colonies forming units (CFUs). These data indicate accumulation under the acrylic base in the course of clinical operation of certain types of microbiota, which requires improvement of the methods of their decontamination. We studied the change in the quantitative and specific composition of the microbiota (bacterial contamination) of acrylic bases CRPD under different modes ("A", "B"). Patients in group "A" used the Sideex solution - a two-component system consisting of a liquid component (glutaraldehyde solution) and a powdery activator, mixed before use to obtain a working activated solution. The liquid component is a clear, colorless solution with a specific odor, which is a 2.2-2.7% aqueous solution of glutaraldehyde, which is an active ingredient, pH=3.0 - 4.5. Powdery activator is a pale-yellow powder containing alkaline components, a corrosion inhibitor, and a dye. The activated working solution is a fluorescent green solution with a specific odor and containing 2.2-2.7% glutaraldehyde; pH=8.2-9.2. (Great Britain). Preparation of the activated solution: a powder-activator is added to the container containing the liquid component (avoiding losses). Cleaning is carried out by the method of full immersion of the prosthesis in solution, with a thickness of the drug over it not less than 1 cm. The dentures are soused in solution for 15 minutes, then thorough washing in the same solution for 1-3 minutes. Sideex activated solution is used for sterilization and disinfection of metal, glass, polymeric (plastic, rubber, etc.) medical products. The dentures of patients from group "B" are decontaminated with 0.2% solution of chlorhexidine bigluconate. The dentures were placed in the solution overnight for 14 days, changing the solution every two days. The decontamination of acrylic bases of CRPD should be considered mode "B" as more effective because of the significant decrease in the species composition of the microbiota (the qualitative indicator of reduction of microbial contamination was 72.0%). It is substantiated that decontamination of acrylic bases of CRPD with mode "A" has a small effect on the species composition of the microbiota, although it significantly (p<0.05) reduces quantitative indicators of microbial contamination. Regarding "B" mode, the species composition of aerobes from 31 lgCFU/ml to 8.7 lgCFU/ml and anaerobes from 42.7 lgCFU/ml to 14.6 lgCFU/ml was considered more effective.

Antagonistic effect of isolated and commercially available probiotics on the growth of Candida albicans on acrylic resin denture surfaces.

STATEMENT OF PROBLEM: Biofilms can be retained on dental prostheses leading to the development of infections. The indiscriminate use of antifungal drugs can result in the development of microorganisms that are resistant to these antimicrobial agents. Whether probiotics are a suitable alternative for reducing the prevalence of oral candidiasis is unclear. PURPOSE: The purpose of this in vitro study was to evaluate the influence of 6 different live strains of probiotics and 2 commercially available probiotic supplements used for inhibiting the growth of Candida albicans biofilm in heat-polymerized acrylic resin denture base material and to determine whether biofilm byproducts modify the surface of specimens. MATERIAL AND METHODS: Biofilms of C. albicans were formed on acrylic resin specimens in the presence of probiotics and quantified by colony-forming units (CFUs), and the surface roughness (Ra) of the specimens was assessed before and after the formation of biofilms. The CFU and roughness data were analyzed by analysis of variance and the Tukey HSD test (α=.05). RESULTS: A significant decrease in the number (CFU/mL) of C. albicans cells was found when they were cultured with 4 probiotics: B. lactis (P=.045), B. longum (P<.001), L. casei (P<.001), and L. helveticus (P<.001) and with the commercially available probiotic Prolive (P=.05). The Ra of specimens decreased after exposure to different microbial biofilms (P≤.05) except in 3 experimental groups. CONCLUSIONS: In general, the tested probiotics had an antagonistic effect on the growth of C. albicans, and the surface of acrylic resin was altered after exposure to biofilm byproducts.

Antifungal Activity of Denture Base Resin Containing Nanozirconia: In Vitro Assessment of Candida albicans Biofilm.

OBJECTIVE: To evaluate the antimicrobial effects of different concentrations of zirconium dioxide nanoparticles (nano-ZrO2) reinforcement of poly(methyl) methacrylate (PMMA) on surface roughness and C. albicans biofilm. METHODS: 20 heat-polymerized acrylic resin discs were conventionally made and divided into 4 groups (n = 5) according to nano-ZrO2 concentration: control (0% filler) and 3 experimental groups (2.5% (Z2.5), 5.0% (Z5.0), and 7.5% (Z7.5)). An optical profilometer was used for surface roughness evaluation, followed by Candida adherence assay. Specimens were sterilized, then immersed in cultured yeast (C. albicans), and incubated at 37°C for 48 hours. After that, discs were rinsed before extracting the clustered pellets of Candida. The attached C. albicans was counted using the direct method after spreading on agar media and incubating for 48 hours. Statistical analysis was performed using one-way ANOVA and Tukey's post hoc test at α = 0.05. RESULTS: Surface roughness was significantly increased with all modified groups compared with control (P < 0.01), which showed the lowest roughness value (0.027 ± 0.004 µm). There was no significant difference in the roughness value among reinforced groups (2.5, 5.0, and 7.5%) (P > 0.05), with Z7.5 showing the highest roughness value (0.042 ± 0.004 µm). Candida count was reduced as the nano-ZrO2 increased but not significantly (P=0.15). CONCLUSIONS: The addition of different concentrations of nano-ZrO2 particles to PMMA increased the surface roughness compared with control; in contrast, insignificant reduction of C. albicans biofilm was detected.

Antibiofilm efficacy of tea tree oil and of its main component terpinen-4-ol against Candida albicans.

Candida infection is an important cause of morbidity and mortality in immunocompromised patients. The increase in its incidence has been associated with resistance to antimicrobial therapy and biofilm formation. The aim of this study was to evaluate the efficacy of tea tree oil (TTO) and its main component - terpinen-4-ol - against resistant Candida albicans strains (genotypes A and B) identified by molecular typing and against C. albicans ATCC 90028 and SC 5314 reference strains in planktonic and biofilm cultures. The minimum inhibitory concentration, minimum fungicidal concentration, and rate of biofilm development were used to evaluate antifungal activity. Results were obtained from analysis of the biofilm using the cell proliferation assay 2,3-Bis-(2-methoxy-4-nitro-5-sulfophenyl)-2H-tetrazolium-5-carboxanilide (XTT) and confocal laser scanning microscopy (CLSM). Terpinen-4-ol and TTO inhibited C. albicans growth. CLSM confirmed that 17.92 mg/mL of TTO and 8.86 mg/mL of terpinen-4-ol applied for 60 s (rinse simulation) interfered with biofilm formation. Hence, this in vitro study revealed that natural substances such as TTO and terpinen-4-ol present promising results for the treatment of oral candidiasis.

Antibiofilm efficacy of tea tree oil and of its main component terpinen-4-ol against Candida albicans

Abstract Candida infection is an important cause of morbidity and mortality in immunocompromised patients. The increase in its incidence has been associated with resistance to antimicrobial therapy and biofilm formation. The aim of this study was to evaluate the efficacy of tea tree oil (TTO) and its main component - terpinen-4-ol - against resistant Candida albicans strains (genotypes A and B) identified by molecular typing and against C. albicans ATCC 90028 and SC 5314 reference strains in planktonic and biofilm cultures. The minimum inhibitory concentration, minimum fungicidal concentration, and rate of biofilm development were used to evaluate antifungal activity. Results were obtained from analysis of the biofilm using the cell proliferation assay 2,3-Bis-(2-methoxy-4-nitro-5-sulfophenyl)-2H-tetrazolium-5-carboxanilide (XTT) and confocal laser scanning microscopy (CLSM). Terpinen-4-ol and TTO inhibited C. albicans growth. CLSM confirmed that 17.92 mg/mL of TTO and 8.86 mg/mL of terpinen-4-ol applied for 60 s (rinse simulation) interfered with biofilm formation. Hence, this in vitro study revealed that natural substances such as TTO and terpinen-4-ol present promising results for the treatment of oral candidiasis.

The effect of nanodiamonds on candida albicans adhesion and surface characteristics of PMMA denture base material - an in vitro study.

Candida albicans is the main causative pathogen of denture stomatitis, which affects many complete denture patients. OBJECTIVE: To evaluate the effect of different concentrations of nanodiamonds (NDs) added to polymethyl methacrylate (PMMA) denture base material on Candida albicans adhesion as well as on surface roughness and contact angle. METHODOLOGY: Acrylic resin specimens sized 10×10×3 mm3 were prepared and divided into four groups (n=30) according to ND concentration (0%, 0.5%, 1%, 1.5% by wt). Surface roughness was measured with a profilometer, and the contact angle with a goniometer. The effect of NDs on Candida albicans adhesion was evaluated using two methods: 1) slide count and 2) direct culture test. Analysis of variance (ANOVA) and Tukey's post hoc test were used in the statistical analyses. RESULTS: Addition of NDs decreased the Candida albicans count significantly more than in the control group (p<0.05), with a lowest of 1% NDs. Addition of NDs also significantly decreased the surface roughness (p<0.05), but the contact angle remained the same. Incorporation of NDs into the PMMA denture base material effectively reduced Candida albicans adhesion and decreased surface roughness. CONCLUSION: PMMA/NDs composites could be valuable in the prevention of denture stomatitis, which is considered one of the most common clinical problems among removable denture wearers.

Superhydrophobic coatings with self-cleaning and antibacterial adhesion properties for denture base.

In this paper, coatings with antibacterial adhesion, excellent biocompatibility, good superhydrophobicity and highly transmittance were fabricated by mixing hydroxyl group fluropolymer (PHF), polyurethane oligomer (Pre-PU) with epoxy functionalized SiO2 nanoparticles and thermal-crosslinked. The properties of coatings were investigated by Fourier transform infrared spectroscopy (FT-IR), Scanning electron microscopy (SEM), Atomic force microscopy (AFM), Ultraviolet near-infrared visible spectrophotometer (UV-3600). The morphology results indicated that the roughness scale of micro-nano structure surface can be monitored by changing the contents of functionalized polymers and SiO2. The coating S2 showed outstanding superhydrophobicity with the contact angle of 155.9°, the sliding angle less than 1°, and good transparency. Furthermore, the coating exhibited antibacterial adhesion and favorable biosafety, confirming a potential for application in the oral field.